Specification:
SERIES
W-C ACCESS DOOR
(CHANNEL
FRAME WITH SPRING ASSIST)
List
Specification:
1. Cover
Leaf(s): 1/4" (7mm) aluminum diamond plate and shall not protrude into the
frame when in the cover is in the open position.
2. Channel
Frame: 1/4" (7mm) aluminum with continuous anchor flange and equipped with
1-1/2 inch (38mm) drainage coupling located in the front left corner of frame.
3. Frame
Coating: Bituminous coating where in contact with concrete.
4. Load
Rating : 300 lbs. psf (1464 kg. psm) uniform live load with a maximum allowable
deflection of 1/150 of the span.
5. Locking
System: Type 316 stainless steel slam lock with removable key.
6. Cover
equipped with the following stainless steel features: spring assist, T-316
heavy duty hinges, T-316 tamper proof attaching hardware, automatic T-316 hold
open arm with aluminum latch.
7. Cushion /
Gasket: neoprene.
8.
Guarantee: Access covers shall carry a lifetime guarantee against defects in
material and/or workmanship.
Download: 
SERIES
W-C ACCESS DOOR
(CHANNEL
FRAME WITH SPRING ASSIST)
Specification:
The W1C
(single leaf) and W2C (double leaf ) series access frames and covers as
manufactured by Halliday Products, Inc. of Orlando, Florida shall have a 1/4 inch
(7mm) thick, mill finish, extruded aluminum channel frame, incorporating a
continuous concrete anchor. A 1-1/2 inch (38mm) drainage coupling shall be
located in the front left corner of the channel frame. A bituminous coating
shall be applied to the frame exterior where it will come into contact with
concrete. The door panel shall be 1/4" (7mm) aluminum diamond plate,
reinforced to withstand a live load of 300 lbs. psf (1464 kg. psm) uniform live
load with a maximum allowable deflection of 1/150 of the span and shall not
protrude into the channel frame when in the open position. Doors shall open to
90 degrees and automatically lock with a T-316 stainless steel hold open arm
with an aluminum release handle. For ease of operation, the hold open arm shall
incorporate an enclosed stainless steel compression spring assist. Doors shall
close flush with the frame and rest on a built-in neoprene cushion/gasket.
Hinges and all fastening hardware shall be T-316 stainless steel. Unit shall
lock with a T-316 stainless steel slam lock with removable key and have a
non-corrosive handle. Unit shall carry a lifetime guarantee against defects in
material and/or workmanship.
Download: 
View: 
Access Covers / Slide and Stop Gates / Debris
Baskets / Telescoping Valves
Portable Hoists
/ Ladders and Ladder Extensions / Mixer Mast / Retro-Grate
/ Accessories
Request Info / Sales / Home